Izborni fenomen 2020
Izvor: https://pedja.supurovic.net/izborni-fenomen-2020Srbija je uvek bila zemlja čuda pa se tako u 2020. godini za izbore pojavio se novi fenomen. Niz opozicionih stranaka je odlučio da ne izlazi na izbore i uputili su otvoren poziv građanima na bojkot, to jest neglasanje. To je interesantna pojava jer situacija na političkoj sceni je postala takva da su sada opozicione, a nekada vrlo jake vladajuće stranke dospele u nemilost građana...
Blog: Peđina beležnica, 21.Jun.2020, 08:57
Traffic (street) signs (3D print)
Izvor: https://pedja.supurovic.net/traffic-street-signs-3d-print These are 3D models of various shaped traffic signs i did for my son. Poles are separate from sign tables for easier printing. Once printed sign snaps on to pole. You may glue it but it is not necessary. Sign height including pole is about 65 mm. Intention is to print sign stickers on paper in color and glue them to the sign tables. You can get models and more details from https://www.thingiverse.com/thing:4394933. Slični članci...
Blog: Peđina beležnica, 25.Maj.2020, 22:39
eBox Filament Dryer Storage Box User Guide
Izvor: https://pedja.supurovic.net/ebox-filament-dryer-storage-box-user-guide eSUN eBox is multifunctional filaments storage box. It has three functions: – Heating and drying filament – Moisterproof and dustrpoof storage – Weighting filament After I misplaced User Manual i found ut it is not available for download nowhere on the Internet. If you end up in the same situation here it is: Download eBox User Guide Slični članci na blogu:OpenStreetMapPHP,...
Blog: Peđina beležnica, 23.Maj.2020, 00:45
Knob with knurled surface for CNC 3018 X and Y axis (3D print)
Izvor: https://pedja.supurovic.net/knob-with-knurled-surface-for-cnc-3018-x-and-y-axis-3d-print I stumbled upon model for bolt and nut with knurled interface https://www.thingiverse.com/thing:9095. I liked how it looks so I decided to adjust nut model and make it to become hand wheels knob for my CNC 3018 X and Z axis. It turned out pretty good. Knob radius is 24 mm and thickness is 10 mm. It is meant to be used...
Blog: Peđina beležnica, 18.Maj.2020, 01:37
DS212/DSO212/DSO202 Oscilloscope Mini Stand 3D print
Izvor: https://pedja.supurovic.net/ds212-dso212-dso202-oscilloscope-mini-stand-3d-print I needed stand for my DS212 oscilloscope. All I could find were too bulky, so I decided to design one. I posted it at https://www.thingiverse.com/thing:4347186 It is very small stand for DS212, DS02 or similar size oscilloscope or some other device. Part dimensions are 35 x 5 x 10 mm so it easy fits in any box or bag you use to carry osciloscope...
Blog: Peđina beležnica, 08.Maj.2020, 23:24
Fixing Baofeng UV-B5 broken battery latch using 3D printer
Izvor: https://pedja.supurovic.net/fixing-baofeng-uv-b5-broken-battery-latch-using-3d-printerI’ve got UV-B5 years ago. It survived lots of use and still served fine. There was one glitch – in some moment latch that keeps battery locked was broken. Radio was still usable but it happens from time to time that battery slips out of socket and radio silently turns off. It was quite annoying but hardly fixable issue. Until today. As I recently got myself 3D printer (Prusa I3...
Blog: Peđina beležnica, 07.Maj.2020, 23:59
Užička komplet lepinja
Izvor: https://pedja.supurovic.net/uzicka-komplet-lepinjaNekad sam subotom voleo da kad je lepo sunčano jutro, naročito u proleće, odem i kupim komplet lepinju za doručak. Pa onda sednem u neki park na klupicu, raspakujem lepinju i stavim je pored sebe. Uzmem poklopac, otkinem komad pa ga umočim u lepinju, onako sa tri prsta, da se dobro natopi i onda to stavim u usta i sa užitkom dugo i lagano žvaćem...
Blog: Peđina beležnica, 11.Apr.2020, 12:10
